Affordable and inexpensive ways to remove yellowness from plastic

Plastic is a material, products from which are present in every apartment. Over time, white turns yellow and things start to look less attractive.

To return them to snow-white, you can use popular folk recipes or adopt special preparations.

For more information on how to remove yellowness from plastic, read the article.

What is the cause of yellowing?

The loss of the original whiteness of the plastic can be due to several factors. This is the improper care of the material and the impact of the environment.

The main causes of yellowing are:

1. Temperature drops. Sharp changes in temperature over time lead to the appearance of microcracks on the surface and the destruction of the upper layer with the dye included in it.
2. Burnout. Direct exposure to sunlight is the most common cause of yellowness.
3. Wrong choice of cleaning products. First of all, this applies to compositions that are aggressive in terms of influence.
4. Settling of soot and other pollutants. This problem is typical for products located in the kitchen, in production facilities or in places with poor environmental conditions.
5. Poor quality material. Violation of technology in the production of plastic can only make itself felt over time. One of these manifestations is yellowing.

If the surface of the plastic does not have serious integrity violations, it is quite possible to lighten it.

How to wipe off plastic?

Methods for cleaning white plastic and restoring its original color should take into account the specifics of the product, the ability to wet it and other features. A wide range of cleaning methods allows you to choose the best optionthat suits your particular circumstances.

Laundry soap

This method can be used to bleach plastics that can get wet and are not in a state of neglect.

Order of use:

• grate 100 grams of laundry soap;
• pour shavings into the container;
• add 1 glass of warm water;
• stir;
• apply with a brush or napkin to yellowed areas;
• wait 30 minutes;
• rub well and wash off.

This method is suitable for preventive maintenance of plastics.

Washing powder with soda

In advanced cases, you can use baking soda with washing powder for cleaning. This method, just like the previous one, is suitable for plastic parts that can be wetted.

Work progress:

1. Pour 50 grams of washing powder and soda into the container.
2. Pour in 1 glass of water.
3. Stir.
4. Using a sponge, wipe the yellowed parts with the resulting composition.
5. Leave the plastic with the applied composition for several hours.
6. Wash off with water.

The use of powders on glossy surfaces requires care to avoid scratching when cleaning.

Vinegar essence

In advanced cases, when the plastic object has turned very yellow, vinegar essence can be used.

Dentifrice

With fresh yellowing of white plastic you can try to cope with tooth powder or chalk... For these purposes, the powder is diluted with water to a state of gruel and the problem areas are rubbed. In this form, the mixture is left to dry completely and cleaned off.

Alcohol

To carry out cleaning of plastic, an alcohol-containing preparation of high concentration can be used, and without a dye. The best option is technical or medical alcohol.

A sponge or napkin is moistened in a cleaning solution and gently rubbed the yellowed areas. Completes the treatment - wiping with a damp cloth.

How to clean white with peroxide?

One of the properties of pharmaceutical hydrogen peroxide is to brighten materials and remove pollution.

The drug is used in pure form, without dilution. The product is applied directly from the bottle to a sponge or napkin, and the yellowed parts are wiped with it.

For advanced cases, the treatment of the same area will have to be repeated several times.

Only a low percentage of medical peroxide can be used for processing plastic. Technical use at home should not be.

Dimexide

Dimexide is an inexpensive pharmaceutical product. It is often used not only for its intended purpose, but also as a preparation for removing yellowing from plastic surfaces.

If the areas that have lost their whiteness are small in size, can be used for sponge application:

1. A small amount of a pharmacy product is applied to a cotton pad.
2. Wipe problem areas.

Dish detergent

Dish Gel is a mild cleaning agent that can be used to clean up plastics in the kitchen and elsewhere.

Order of use:

• moisten a sponge or napkin with water;
• give off excess moisture;
• apply a small amount of gel to the sponge (napkin);
• wipe the plastic;
• wash off with water;
• wipe dry.

White

Chlorine products help brighten surfaces. Whiteness is capable of eliminating even old yellow spots, which are already many years old.

Due to the nature of the composition, such a remedy can be used only as a last resort, having previously checked the reaction of the material to whiteness in an inconspicuous area.

In its pure form, the drug can be used for spot treatment, in diluted form - if the object needs to be cleaned entirely.

The solution for soaking plastic is prepared concentrated, in a 1: 1 ratio with water. To achieve the desired effect, the object is soaked for several hours.

Whiteness requires use in a well-ventilated area due to corrosive fumes.

How to remove yellow spots with special products?

Special products that will help clean the plastic and restore the lost color are effective in most cases. A common disadvantage of such drugs is their high cost.

Mellerud for plastic products

Mellerud is a product that removes various types of dirt from plastic products. This drug can be used to tidy up:

• plastic frames;
• kitchen furniture;
• ceiling panels;
• car interior;
• window sills;
• wall panels, etc.

Mellerud comes in liquid form. It contains up to 5% nonionic surfactants. The price of a 0.5 liter bottle is about 360 rubles.

HG intensive plastic cleaner

Tool TM HG is designed for cleaning painted walls, wallpaper and plastic... In its composition - up to 5% APAS and non-surfactants. When using, the drug is sprayed onto the stained area and manual cleaning is carried out.

The drug does not require additional rinsing. This product is biodegradable. The average price is 380 rubles per 0.5 liter bottle.

Nordland

The product is available in liquid form, intended for cleaning plastic products. This product is biodegradable, which allows you to take good care of plastic products, and at the same time do not harm the environment.

The active spray is suitable for caring for all types of plastic, has good detergency. The drug is applied by spraying onto the treated area. The average price is 400 rubles per bottle.

Preventive measures

Prevention will help prevent yellowing of plastic. Necessary measures include:

1. Do not use hard brushes for cleaning that could damage the surface.
2. Do not expose the plastic to heat - this may cause it to turn yellow.
3. It is not advisable to smoke near the plastic, as the emitted resin literally eats into the plastic layer.
4. If possible, white plastic items should be shaded from direct sunlight.
5. Any contamination that has fallen on the material must be removed immediately, preventing them from eating into the plastic.

Recommendations

The following tips from cleaning specialists will help you better cope with the task:

1. Before undertaking bleaching, the surface must be prepared - remove dust and dirt.
2. All work should be carried out with rubber gloves to protect hands.
3. It is necessary to consider what kind of plastic will be processed. For some types of products, special products are produced with the mark "for refrigerators", "for microwaves", etc.
4. After cleaning is complete, wipe the plastic surface dry.
5. When processing plastic from yellowing with vinegar essence, alcohol, Dimexide and other substances, it must be remembered that if the cleaning agent gets into the areas with inscriptions, they can also be erased.
6. It is convenient to use an old toothbrush for cleaning small plastic items.

The most complete and useful information on methods and means of removing yellow spots and yellowness from various surfaces and products is presented in this section.

Related videos

The video will tell you how to whiten yellowed plastic:

Conclusion

You can remove yellowness from plastic using home recipes and special tools. At the same time, regular competent care of the products will significantly reduce the likelihood of rapid yellowing and loss of attractive appearance.