How to carefully and effectively remove the tape from plastic windows and not damage the coating?

foto4298-1 When painting operations are carried out, window glass (standard products or plastic) is sealed with tape so as not to stain with paints.

Scotch tape can be narrow or wide, on a paper or fabric base (if it is a painter's tape). This is a tape with one-sided or double-sided adhesive coating.

The density and quality of the glue determine the degree of fixation of the adhesive tape: weak or strong. Also, the product can be glued instantly or gradually set to the surface.

This material protects windows well from dirt, but leaves noticeable marks on them. And it is most problematic to remove them from plastic surfaces.

Content

How to remove from window plastic?
How do I clean the glass?
How and with what to remove the double-sided tape?
Prohibited methods and substances
General tips and tricks for work
Conclusion

How to remove from window plastic?

how remove traces of scotch tape from plastic windows? Below are detailed instructions on the most popular methods for removing tape from plastic windows.

Using a new ribbon

foto4298-2 If the tape has been removed recently from the plastic window, and the glue remains are still soft, new tape is glued to the stained areas. It is firmly pressed down and comes off abruptly.

To remove traces completely, repeat this procedure 3-4 more times.... Thanks to this method, the plastic surface will remain intact.

This method has an alternative - a regular stationery eraser. They can just gently wipe off the remaining adhesive tape from the window.

Baking soda

This is also one of the safest products for cleaning this surface. Soda is diluted in water, suitable proportions: 2 tablespoons. spoons to one sixth of a glass of water.

When stirring, you should get a thick mixture, like sour cream. It is applied to the problem area and remains there for 3-5 minutes, after which it is removed with a damp cloth.

If cleansing did not produce the desired effect the first time, then the operation is repeated until the desired result is achieved - this is a minimum of 2-3 times.

You can act a little differently. Soiled areas on plastic are slightly moistened with water and sprinkled with a pinch of soda... Then wipe these places with a sponge for washing dishes.

Neutral agent with alcohol

foto4298-3 It helps optimally when the tape has been removed for a long time, and the traces from it are very stable, and the glue has thoroughly eaten into the surface.

A neutral composition with alcohol can be:

vodka,
alcohol solution
transparent lotion.

Any of these means impregnates a sponge or fabric that does not have a lint., and the dirty areas are carefully wiped.

Medical alcohol is especially effective. A cloth is abundantly impregnated with it and carried out on the required zones. The liquid should act on them for 10-15 minutes. After that, with the hard side of the sponge, you need to carefully wipe the sticky areas until the dirt is completely removed.

Before the procedure, try the composition on a small area, isolated from the eyes... The reason is that some types of plastic are too susceptible to alcohol. They can change color or deform. If this happens to the test site, this method will have to be abandoned.

Some housewives believe that a nail polish remover can also be included in this category. But it is better not to use it for plastic windows. Because of this, a large number of cloudy spots may appear on them.

Non-aggressive household compounds

foto4298-4 Here it is better to give preference to formulations having such formats: powder, gel or solution. Because versions with large components often leave scratches on the surface.

Also moisten the sponge in the composition and wipe the frame with it... Press down harder on areas with adhesive residues.

The proper result can also be achieved with the help of kitchen gel (for cleaning dishes) and spray for cleaning windows. The gel is applied to problem areas and gently wiped first with the hard side of the sponge, then with the soft one, until the sticky areas disappear.

The spray is sprayed on the glue spots and stays on for 5-10 minutes... This is followed by a wiping procedure with a dry cloth. After that, the glass is washed with clean water.

Soap solution

It is only effective for removing sufficiently fresh marks. In a glass of warm water, about 5 grams of soap or 8-10 drops of its liquid analogue is placed.

The resulting composition is impregnated with a dishwashing sponge. Its hard part is used to wipe dirty places. You don't need to press hard.

After 5-10 minutes, the procedure is repeated... Once again, if necessary. Until the contamination is completely removed.

Melamine sponge

foto4298-5 It is an innovative solution in the field of cleaning and cleaning surfaces made of various materials. Melamine visually resembles foam rubber, but is a symbiosis of ammonia and cyanuric chloride. As a result, a sponge with crystals is formed.

It is effective for removing any blemishes, including from scotch tape. Before use, it must be moistened with warm water and wrung out.

Excessive twisting and squeezing should not be done. As a result, its structure collapses and efficiency decreases.

The problem area just needs to be gently rubbed... The product operates on the abrasive principle and emits its cleaning foam, which is easily washed off.

In the process of application, the product quickly wears out, its structure is filled with dirt. For this reason, the sponge should be changed frequently.

The consumption of melamine is determined by the surface parameters and the level of contamination. It is better to cut off a part of the sponge and use it as intended than to spoil it entirely. In total, one such sponge is enough to clean 10 m2.

Special means for removing stickers

They can be purchased at any specialized points of the construction and business profile. On sale they are presented in aerosol format. Therefore, they are very convenient to apply.

After spraying the product on contaminated areas, a reaction takes place that destroys the adhesive layers, and the tape removes without problems. The remaining glue dissolves rapidly, and to remove it, the surface is wiped with a regular cloth.

The following are examples of the most popular products with their average price tags:

Scotch remover... It contains safe solvents, citrus oils and fatty acids.
The tool efficiently and gently eliminates traces of stickers, scotch tapes, without causing damage to the surface. Also sprayed on difficult areas. Cost - 400 rubles.
AntiScotch "AstroChem"... Sold in cylinders. Shake the container for 3-4 seconds before use.
Next, the product is sprayed onto the problem area. After a couple of minutes, the remaining glue is carefully removed with a rubber spatula. Cost - 200 rubles.
Mellerud. The format of the product is spray. Effectively removes the remnants of any stickers and double-sided tapes. Application: a cloth is abundantly impregnated with it, then the surface is moistened.
After 7-10 minutes, it is rubbed off until it is completely clean. Finally, this area is rinsed with warm water and wiped dry. Price list - 470 rubles.
Cleaner Scotch-Weld... This is an aerosol. Effectively combats all types of adhesives. Spray it onto the sticky spot. Wipe with a damp sponge after 5 minutes. If the contamination is complex, repeat the operation 2-3 times. Price - RUB 500
Liqui moly... This composition is based on the armor field. It is characterized as a very powerful tool for removing sticker residues.

Pure gasoline and white spirit

They effectively destroy the adhesive base and clean the plastic window, but they can damage its surface.

A test should be carried out before use: wipe a small inconspicuous area of the window with this product If a change in color and configuration is detected here after 5-10 minutes, then this method is not suitable for your window.

Hairdryer or home steamer

It is only suitable for heat-resistant plastic... The problem area is heated slightly, then washed with a sponge.

The entire window does not need heating. Indeed, during the procedure, the end of the tape immediately leaves. And by pulling on it, you can eliminate most of the product.

Ordinary liquid oil

foto4298-7

The oil can be:

sunflower,
linseed,
olive.

Any suitable oil is applied to the adhesive tape surface.

After 10-15 minutes, the tape is removed, traces of it are eliminated with a damp cloth. Warm soapy water is used to remove oil residues.

Some owners use aromatic oils. This creates a pleasant smell in the room for a long time. This method is suitable for all types of plastic.

Sponge + scraper + laundry soap

For the procedure, you will need a sponge with a hard zone, a rubber scraper and laundry soap. The specified part of the sponge is covered with soap, the plane is wiped with it.

After 5-8 minutes, the end of the tape is picked up by the sharp plane of the scraper, and the adhesive tape is systematically detached from the window. If the first attempt fails, repeat the operation 2-3 times.

Removing the tape remove traces of glue... To do this, they are wiped with a hard part of a sponge covered with soap. If they are not eliminated immediately, repeat the action until they are completely eliminated.

Usually 2-3 procedures are enough for this. In severe cases, up to 5-6.

Toothpaste

This product is applied to the problem surface for 10 minutes.... Then the dried paste is removed with a dry cloth, and this place is washed with soapy water.

This is an effective procedure that completely removes all adhesive traces and does not damage the material. Today it is quite popular among the owners of plastic windows.

How to clean windows from scotch tape and wash plastic from glue, the video will tell you:

How do I clean the glass?

To eliminate scotch residues from glass, you can use the following techniques:

Acetic acid solution (proportions with water - 1: 1)... The surface is processed with it. The product remains for 30 minutes. Then it is removed with a sponge. If the tracks are fresh, you can do without a divorce in the water.
Vegetable or olive oil... It covers the remains of the tape with a thin layer. After 8-9 hours it is washed off with warm water.
To create a special atmosphere in the room, you can use oil with a fruit scent.
Ammonia... The contaminated area is wetted with it. After 15-20 minutes, it is washed off with a damp cloth.
Acetone. The principle of operation is identical to item 3
Special tool Sticker Remover HG... It is applied to the surface.After 2-3 minutes, it is washed off with a clean cloth.
Nail polish remover... Apply to a dirty area. Remove after 15-20 minutes with warm water.

How and with what to remove the double-sided tape?

This product has a foam base. It spreads over the surface under thermal influence and absorbs dust.

For remove double-sided tape and its traces the following methods are effective:

Orange essential oil... Available from a beauty store or drug store. Before use, completely and very carefully remove the tape with a blade or spatula.
Put 8-10 drops of this oil on its remains. After 20-30 minutes, the glue will completely dissolve and can be removed with a hard part of the sponge covered with dishwashing gel.
Special citrus cleaner TM 3M... Available in aerosol format. Splashes onto the stained area. After 3-5 minutes, it is washed off with warm water and wiped with a dry clean cloth. The price for 500 ml is about 1500 rubles.
Brake fluid... It allows you to effortlessly remove adhesive residues. For this, difficult zones are slightly moistened with it. Wash off after 20 minutes.
WD-40... This tool is very popular among motorists. It also works great on stains of any origin. They should cover the sticky area with a thin layer and wash off with a rag after half an hour.

Prohibited methods and substances

For a successful elimination of scotch tape and its remains from plastic surfaces do not use elements that lead to their color change and deformation.

These include:

cleaning powders with hard and massive fractions. They leave scratches on the surface;
chemicals containing acids or corrosive ingredients. Plastic interacts with such substances and loses its color and shape, and eventually collapses.

foto4298-10 Quite dangerous methods are considered:

Mechanical... Contamination can be removed with blades, spatulas. But you need to act very carefully. In most cases, the surface receives visible damage.
Working with a construction or household hairdryer... Apply heat to the plastic at the required distance (at least 30 cm) and no more than 2-3 minutes. Otherwise, the glass unit will burst.

General tips and tricks for work

To remove adhesive tape and its traces from a plastic window, use only methods that do not harm its surface.

You can use any folk remedy, like soda or soap composition. You can give preference to chemical or mechanical methods. In any case, proceed carefully so as not to damage the material.

Conclusion

When working with alcohols, test them in modest inconspicuous areas first.... And experts recommend using proven professional tools. They act quickly and efficiently.