Tips from experienced car owners on methods and means of protecting the car from rust

Rust is merciless. All cars, without exception, are subject to it. Therefore, every vehicle owner should know how to protect it from corrosion.

The article will focus on the most reliable and effective ways to protect and prevent a car from rust.

Can the machine be protected against corrosion?

The car can and should be protected from rust. This is a "disease" that must be treated so that it does not lead to the destruction of the metal.

The main factors provoking the appearance of corrosion are water and oxygen. The cheaper and the poorer the paintwork, the higher the likelihood of “mushrooms” appearing.

Promote the formation of oxides:

• mechanical damage,
• industrial emissions,
• reagents sprinkled on roads.

To protect the car from corrosion, it is necessary to minimize the harmful effects of environmental factors on the car.

General recommendations

To prevent rust from forming, you need to adhere to the following recommendations:

1. Keep your car clean. It is unacceptable to put it in the garage for several days if it is covered with a thick layer of dirt. The more often this happens, the faster the car will begin to "bloom".
2. Dry the car thoroughly after washing. If you drive a wet car into an unventilated room, rust will not keep you waiting.
3. The vehicle should be inspected regularly, externally and internally. It is easier to get rid of a small stain than to repaint the body completely. Be sure to inspect the car from below at each paddock on the lift.
4. Preventive treatment with anticorrosive treatment should be carried out at least once every 3-5 years.

The best ways to fight

Many drivers believe that expensive cars are covered with high-quality anti-corrosion coating, so they are not afraid of rust. In fact, this is not the case. Owners of both premium and budget cars should take care of vehicle protection.

Here are the 4 most effective ways to prevent rust:

1. Anti-corrosion coating... Various modern compounds are used as anticorrosive compounds designed to protect metal from rust.

   They work very simply: after their application, a protective film forms on the surface of the car, which protects it from various damages and prevents rusting.

   Anti-corrosion treatment should be carried out at least once every 3 years. The bottom of the car needs special protection. Before processing it, you need to remove the rust if it has already formed.

2. Electrochemical or cathodic... This method is used when it is necessary to protect hard-to-reach areas from rust. It is based on the processing of parts with an auto zinc plate or tip. A voltage difference must be created in order for the metal ions to travel to the surface in need of protection.

   To do this, the zinc plate is connected to the "+" of the battery, and the body or other element to the "-". Processing is carried out slowly and systematically. The formed barrier will help protect the metal from corrosion. This method allows you to save money on paying for the services of specialized services involved in applying an anti-corrosion coating.

3. Mechanical... This method is not essential, as the entire vehicle cannot be placed in a rubber or plastic cover. However, especially vulnerable areas can be protected. For example, plastic wheel arch liners are installed in the wheel arches. There is specialized protection for sills, bottom, hood and other elements.
4. Lamination. This method can be attributed to mechanical protection methods. It boils down to applying a thin durable film to the body and hinged panels of the car. It is durable and highly resistant to moisture and chemicals.

Top 3 best anticorrosive products for cars

There are at least 3-5 types of anti-corrosion compounds in stores for motorists. They are also often ordered from large online markets. More than a hundred items can be found on the market, but the following anticorrosives are in high demand among drivers:

1. Anticor Rast Stop... This composition is based on oil. The tool is intended for the treatment of cavities in the car. Spray and liquid are commercially available for brushing.

   According to the manufacturer, the surface does not require preliminary preparation, that is, anticorrosive can be applied directly to rust, to untreated metal. The price of the aerosol is 1050 rubles.

2. Antikorr HB BODY 930... This composition is used for bottom treatment. The liquid is black. It is based on bitumen and rubber. It is poured into enameled jars. Apply it with a brush. The main advantage of this product is its high adhesion. The cost of a package weighing 1 kg is 450 rubles.
3. Anti-corrosion rubber-bitumen coating RUNWAY... This is a universal compound that contains rubber, titanium dioxide, acrylic resin, xylene, paraffin and other components that provide reliable protection of the car from rust. It can be used to treat the bottom, sills and vehicle body. Anticorrosive spray is produced. The price for a 450 ml can is 250 rubles.

Regardless of the tool chosen, before the first use, you need to read the instructions. Processing can be carried out both independently and in specialized services.

Helpful information

Despite the fact that most anticorrosive manufacturers indicate that the car does not need pretreatment before applying the composition, professionals do not advise doing this.

Tips for protecting your car from rust:

1. If small chips or scratches appear on the car, they should be painted over immediately. Sometimes one night in a wet garage is enough for the damaged area to be covered with rust.
2. When choosing a car wash, you need to give preference to professional organizations that use high-quality shampoos, do not stand them on the body for more than a few minutes, and are also equipped with specialized equipment.
3. When wiping the car, you can only use clean napkins and rags that will not leave small scratches behind.
4. If possible, they refuse to drive off-road.

You can find out about the ways and methods of removing rust from a car here.

Related videos

How to protect the car body from rust and corrosion, the video will tell you:

Conclusion

You can prevent the appearance of rust on the car. You need to start with basic rules: wash the car more often, dry it completely, put it in a covered parking lot, and also eliminate all scratches and cracks in time.

It will not be superfluous to resort to additional protection measures: lamination, anti-corrosion coating, machining.