A few tricks on how to remove bad odor from a new electric kettle

An electric kettle is a device that is in almost every home and office, and from time to time they need to be replaced.

When buying a new kettle, you may encounter an unpleasant problem that will need to be solved - an unpleasant smell. Special tools and simple homemade recipes will help to cope with the task.

We will tell you how to remove the smell of plastic from a new electric kettle in the article.

How to remove the odor of plastic with improvised means

Simple recipes from improvised means can be as effective as purchased ones. It is not difficult to use them, and the processing itself does not take much time.

Soda

Soda is a food product that is used not only for food, but also for cleaning. In addition, this substance can effectively eliminate various odors.

Application procedure:

1. Pour in the maximum amount of water allowed.
2. Add 4 tbsp. l. soda.
3. Stir to dissolve the powder.
4. Boil.
5. Without draining the water, leave to stand for 2 hours.
6. Boil again.
7. Drain the soda solution.
8. Rinse the inside of the device.

He will tell you about descaling in a kettle with soda this article.

Lemon acid

Citric acid powder is a food product that can be used to remove unpleasant odors and limescale deposits.

Procedure:

• fill the kettle up to the maximum level with water;
• add 1-2 sachets of citric acid;
• turn on the kettle;
• after boiling, leave it to stand for 10-12 hours;
• start boiling again;
• drain the solution;
• Rinse.

He will tell you how to descale a kettle using citric acid this article.

Vinegar

Using table vinegar is good for removing unpleasant odors. Also, this option can be used if scale has appeared inside the kettle during operation.

Application:

1. Pour a glass of water into the kettle.
2. Add ½ cup vinegar.
3. Top up with water up to the maximum mark.
4. Switch on the device.
5. Without letting the water boil, turn off the kettle.
6. Set aside for ½ hour.
7. Repeat processing.
8. Drain the water and vinegar.
9. Wash the inside of the device.

Learn how to descale a kettle using vinegar here.

Bay leaf

Bay leaves, which are used in cooking, will also help when you need to remove the smell. To process one electrical appliance, you will need 5-7 non-small leaves.

Application:

• pour water up to the maximum mark;
• lower the leaves of the laurel tree;
• boil;
• leave to stand for 3 hours;
• re-enable boiling;
• pour the contents out of the kettle;
• Rinse.

Sugar

The use of regular sugar will allow you to quickly and safely deal with unpleasant odors.

Application procedure:

1. Add as much water as possible.
2. Switch on the device.
3. Pour 3 tbsp into boiled water. l. granulated sugar.
4. Set aside for 10-15 minutes.
5. Drain.
6. Rinse.

Activated carbon

Activated carbon is a sorbent used in medicine and technology. With its help, it is possible to remove an unpleasant odor. For these purposes, you will need 15 tablets.

Using:

• dip coal tablets into an empty kettle;
• close the top cover of the kettle, and wrap the device well with cling film so that it is hermetically sealed;
• leave in this form for a day;
• remove the pills;
• pour water to the maximum;
• boil;
• drain;
• rinse the inside.

Coca Cola

The use of cola will help not only to cope with the smell, but also to qualitatively eliminate all substances that may have remained inside the device since its production.

Application:

1. Pour the cola to the maximum volume.
2. Turn on boiling.
3. After boiling, put the kettle aside to cool.
4. Repeat boiling up to three times.
5. Drain the liquid.
6. Rinse the kettle.

You can learn about the use of Coca-Cola in the fight against scale in the kettle. here.

How to eliminate the smell of plastic in a new kettle, the video will tell you:

How to get rid of using special formulations?

In cases where treatment with simple home remedies did not help, you can use special preparations. They have a complex effect - they clean the surface, remove dirt and remove unpleasant odors.

Topper

For descaling and quality processing, a special agent from Topper can be used. The German-made drug takes good care of the material from which the device is made, is non-toxic, does not contain fragrances.

Order of use:

• to eliminate the odor, a liter of water is poured into the kettle;
• add 100 ml of cleaning agent;
• heated to about 50 ° C;
• leave for half an hour;
• the liquid is drained;
• the inside is washed with water.

A 0.25 liter package costs an average of 140 rubles.

Top House

The product for coffee makers and electric kettles is designed for descaling and hygienic cleaning of the inner surface. The consumption of the drug is economical.

The application is very simple:

1. Pour a liter of water into the kettle.
2. Boil.
3. Wait 5 minutes.
4. Pour in 150 ml of Top House.
5. Set aside for half an hour.
6. Pour out the solution.
7. Rinse the kettle.

The average price for 0.5 liters is 220 rubles.

Anti-scale Magic Power

The product is intended for cleaning the inner surface of teapots and coffee makers in contact with water. The tool belongs to environmentally friendly, based on citric acid and non-surfactants. Manufacturer - Germany. Magic Power for teapots is biodegradable, odorless and comes in liquid form.

Application:

• pour a liter of water into the device;
• add 100 ml of the drug;
• heat the kettle to 50 ° C;
• set aside for 30 minutes;
• drain the liquid;
• rinse the kettle, and then boil it with clean water;
• drain the water.

The average price is 240 rubles per 0.5 liter bottle.

Material of manufacture: what does it affect?

Most often, glass, plastic and metal are used to make electric kettles. There are several causes of bad smell from a new appliance, but not all of them can be eliminated.

Technical oils - residues from production

In the manufacture of a kettle from any kind of material, even at the stage of creation, technical oils can get into it... If at the end of manufacturing they were not removed, then the pungent smell will continue to persist at the time of sale. Such a nuisance can happen with equipment made from any kind of material.

A chemical smell that is not associated with a household appliance

After opening the sealed package, an unpleasant specific smell may come from the new kettle.

This may be due to the production air trapped in the package. before sealing. This situation can happen with a kettle made of any kind of material.

If the problem arose at the time of packaging, then it will be enough just to ventilate the product in a room with good ventilation. You can speed up the elimination of odors using home and special products.

Plasticizer, colorant and other plastic components

A strong and poorly removable smell of plastic very often comes from low-quality appliances. This problem is typical for teapots with a plastic body made by a dubious manufacturer.

If the source of the unpleasant odor is the ingredients of the plastic itself, it will not be possible to solve the problem by airing and processing. Such devices are not recommended for boiling drinking water..

During operation, such a device will release toxic substances into the water, which poses a threat to health. You cannot use it.

What not to do?

In an effort to quickly cope with the problem, sometimes you can only make it worse. To prevent this from happening, it is important to remember the following prohibitions:

1. The cleaning agent, even in the form of a solution, should not be kept longer than specified in the instructions.
2. Do not use several products at the same time, as corrosive and toxic compounds may form as a result. If the previous method did not help, the kettle must be washed well, and only after that continue the treatment with another means.
3. Do not use products that are not intended for dish care, such as room fragrances, eau de toilette, bath cleaners, etc., to combat odors.

7 recommendations

Professional advice will help to cope with an unpleasant odor effectively, and without unpleasant consequences:

1. Even if a new kettle does not exude an unpleasant odor, it must first be boiled and the water drained. And only after that start operation.
2. If the smell of plastic has not gone away after repeated processing, it is better to return such a thing back to the store.
3. To process the inside of the kettle flask, only food products or special products can be used that are designed specifically for the care of electric kettles.
4. An unpleasant smell from a plastic kettle can appear after several years of use. This is due to the appearance of microcracks on its inner surface as a result of regular heating. In this case, the device also needs to be replaced.
5. To prevent the electric kettle from acquiring an unpleasant odor, only clean water is allowed to boil in it.
6. If the kettle is not planned to be used for a long time, water is poured out of it, and the lid is opened to dry.
7. Boiling untreated water (with impurities that do not meet sanitary standards) in the kettle can lead to the release of an unpleasant odor.

Conclusion

The question of how to remove odor from a new electric kettle can be solved in several ways. This is possible when there are no errors in the manufacturing technology of the teapot itself, and there are no complaints about the quality of the goods.