Just Add Water, Or How To Clean A Carpet With A Washing Vacuum Cleaner

Wet cleaning the carpet allows you not only to remove dust from it, but also get rid of serious dirt. To help housewives, a washing vacuum cleaner was developed.

In order for the cleaning to be completed as efficiently as possible and not to cause damage to the product, you need to know the basic rules for its implementation.

About, how to clean the carpet washing vacuum cleaner Thomas, Kirby, Zelmer, you can learn from this article.

Which can and cannot be washed?

For cleaning the floor with a washing vacuum cleaner can be used in the following cases:

1. The product is sewn of synthetic materials. Rugs made of acrylic, polypropylene, polyester, microfiber, polyamide, nylon and terklon are not afraid of wet cleaning.
2. The flooring is made of semi-synthetics.
3. The carpets are made from jersey. You can clean them with a washing vacuum cleaner, but with care, as they are sensitive to water.
4. The products are sewn from tufting.

Using a washing vacuum cleaner do not wash carpets such as:

• products from natural fabrics: wool, felt and fur;
• silk floor coverings;
• hand-made products;
• viscose carpets;
• jute carpets with a very long pile over 15 cm;
• cotton and linen carpets - dry clean only.

This causes unpleasant odors and bacteria growth.... It will be very difficult to "revive" them.

Each carpet has specific care features. It directly depends on its composition. Most often, there are products of a mixed type, so it is necessary to check with the seller at the stage of purchase whether a washing vacuum cleaner is suitable for cleaning them.

Algorithm of actions

To clean the carpet with a washing vacuum cleaner, you need to follow several steps in sequence.

Algorithm of actions:

1. First you need to vacuum the carpet as usual. Dry cleaning is necessary in order to remove dirt and large debris from it. Be sure to remove all dust from walls and furniture.
2. Water and detergent are added to a special reservoir. Prepare the vacuum cleaner for operation (put on a nozzle, untwist the cord, etc.).
3. In order for the cleaning to be effective, all movements are performed slowly. The brush is gradually moved along the pile. The pressure should be medium, you should not press too hard.
4. After the floor covering has been treated with detergent, the residues are drained and the reservoir filled with clean water. Perform cleaning again.
5. Then they pass over the carpet with a suction nozzle, if such is provided by the model of the vacuum cleaner.
6. After washing, the dirty water is drained, and the product is left to dry. You cannot walk on it at this time. The average drying time is 3 hours. You can open the windows to reduce the humidity in the room.

Features of cleaning with household appliances of different brands

Depending on the brand of the washing vacuum cleaner, there are certain features of their operation. Let's look at how devices from Kirby, Thomas, and Zelmer work.

Kirby

Their main feature is the correct consumption and collection of foam.... When the vacuum cleaner moves forward, it will be absorbed into the product, and when the device is moved in the opposite direction, the cleaning agent is evenly distributed over its surface.

Then you need to wait until the foam is completely dry. At this time, the wash head and water tank are changed to a permanent bag and regular brush. With their help, the palace is vacuumed in the usual mode.

Thomas

Vacuum cleaners Thomas for wet cleaning can only be used in combination with special attachments. It is important to install a splash guard in the waste water collection tank.

To keep as little water as possible on the carpet, it is recommended to clean at maximum power... The direction of movement of the brush is towards the retractable one. After cleaning is complete, all attachments and containers are rinsed and dried.

Zelmer

The Zelmer carpet vacuum cleaner is equipped with a special nozzle and turned on at full power. The beginning of the flooring is treated with a cleaning solution.

You need to start cleaning from the far end of the room and move towards the door. The brush should move in strips, overlapping each other.

After cleaning is complete, the cleaning solution is poured out and the reservoir is filled with clean water. With its help, the palace is processed again. Cleaning ends by collecting water using a suction nozzle.

Regardless of the brand of the device, all tubes, brushes and reservoirs must be thoroughly washed and dried after cleaning. Only then can the equipment be sent for storage.

Video review of carpet cleaning with a Zelmer ZVC762ZKRU (Aquawelt Plus VC7920.5SK) vacuum cleaner:

Tips & Tricks

So that after wet cleaning there is no dirt left on the carpet, the following recommendations should be taken into account:

1. The nozzle of the vacuum cleaner must be suitable for the length of the floor covering.
2. Do not clean products too often. It is recommended to use a washing vacuum cleaner once a week or less.
3. If the carpet is new, then the first wet cleaning can be carried out 3-6 months after purchase.
4. Remove stains need immediately after from appearance. It will be more difficult to do this in the future.
5. Do not use hot water to wash the carpet.
6. Do not clean the carpet if there is dust or debris on it. You must first carry out dry cleaning.
7. During harvesting, do not rush; processing is carried out at a moderate pace.
8. To prevent the carpet from getting wet, it is not necessary to process the same area for too long.

Conclusion

Vacuuming your carpet with a vacuum cleaner will remove dust mites, stubborn stains, and unpleasant odors. During such cleaning, high-quality air humidification and removal of allergens from it occurs..

The coating dries quickly, since the vacuum cleaner collects most of the water in the tank. After cleaning, the carpet takes on a fresh and renewed look.