List of frequent breakdowns of Philips steam generators and recommendations for repairing household appliances

Philips steam generators, like any other appliance, can fail.

Some breakdowns can be dealt with on your own if you correctly determine their cause. Other malfunctions can only be eliminated by the master.

In this article, we will consider the main faults Philips steam generators (no steam, the device does not turn on, splashes with water, etc.), as well as advice on how to repair a household appliance with your own hands.

How to disassemble and repair yourself?

If the cause of the breakdown steam generator Philips is not associated with trivial malfunctions in the form of an abundance of scale or damage to the electrical cord, then you need to look for it inside the device.

Often the device stops working due to a breakdown of the electromagnetic coil... You can check its performance with a multimeter.

You can only try to get inside the device if you have certain knowledge in the field of electronics.

Step by step instructions for disassembling your Philips steam generator iron:

1. Disconnect the device from the network.
2. Remove the protective rubber bands from the steam station and unscrew the bolts underneath.
3. Remove the top cover. Under it is the upper case, which is held in place by 3 screws. They also need to be unscrewed.
4. Removing the housing reveals an electromagnetic coil that needs to be replaced. It rests on one nut.
5. After replacing a part, the device must be reassembled in the reverse order.

It cannot be asserted with a 100% probability that the steam generator failed precisely because of a malfunction of the electromagnetic coil. It is possible that the breakdown lies in other details, and it is better to entrust this to the master.

No steam: what is the cause of the malfunction and what should I do?

If after turning on the appliance it does not produce steam, you can try to cope with the problem on your own. Possible reasons leading to the malfunction:

1. The appliance is clogged with limescale... To get rid of it, you need to clean it.Most Philips-branded models are equipped with an automatic descaling function. To do this, pour water into the device, turn it on and press the desired button. After a few hours, the liquid is drained by flushing the boiler again. Some models require replacement of cartridges.
2. The button that is responsible for dispensing steam has not been pressed... To cope with the problem, you need to press and hold on it until the device works.
3. The appliance is not hot enough... As a rule, steam is supplied 2 minutes after turning on the equipment.
4. There is too little water in the boiler... To start dispensing steam, you just need to top up to the MAX level.

Steam will not be dispensed when the appliance is stationary or suspended and at an angle when the automatic steam dispensing mode is off. In order for the device to start functioning, it must be put into working position.

Does not turn on

If your Philips steam generator iron does not turn on, the reasons may be:

1. Damaged power cord... When there are no visible defects, it is difficult to determine the broken place. Need help from a specialist.
2. No power supply... To check the health of the outlet, you need to turn on any other device.
3. Power indicator does not work... In this case, the device itself may be serviceable. You need to press the steam button to check its functionality.
4. An electronics malfunction has occurred... In this case, the help of the wizard is required.

When troubleshooting, you need to refer to the instructions that come with the device. It lists the main reasons that can lead to incorrect operation of a particular model.

Water flows from the device

If water is leaking from your Philips steam generator iron, the reasons may be:

1. There is a lot of condensation in the steam hose... This can happen after long periods of inactivity. To solve the problem, the sole of the iron must be directed to the side and the steam button must be held until the water stops flowing. You should also check the hose for kinks and clamps.
2. Water containing fragrances or other contaminants has been poured into the appliance... To cope with the problem, the boiler needs to be flushed. Then clean water is poured into it and the device is started again.
3. The steam boost function has been used too often... You can continue to use the device, but wait a while before pressing the intensive steam button again.
4. After descaling the appliance there is still water in it... It is she who flows from the sole. You just need to wipe it with a cloth.
5. Broken gate valve... Its replacement is required.
6. The holes are clogged with limescale... Cleaning is necessary to get rid of the problem.

Rusty water splashes

If rusty water is leaking from your Philips steam generator iron, the reasons may be:

1. The device was filled with water with impurities... To get rid of the problem, the boiler must be flushed.
2. The appliance has not been used for a long time, but some water remains in it.... To solve the problem, the tank must be thoroughly rinsed.
3. The heating element is out of order... Its replacement is required.

If flushing the boiler did not help to cope with the problem, you should contact the service center.

Features of the choice of spare parts

To select quality Philips steam generator repair parts, you need to adhere to the following recommendations:

• make a purchase in stores that are not suspicious;
• demand a check and a warranty card from the seller;
• purchase parts in original packaging;
• inspect spare parts for damage before purchase.

How to find a qualified craftsman?

To find a qualified technician, it is recommended to contact the Philips branded service center... If the warranty period of service has already expired, then you can find a specialist on ads on the Internet or on the recommendations of friends.

A professional never charges money for diagnostics. Payment is made upon the provision of the service. If the master leaves the device at home, you need to demand from him a document that he received it in his hands.

Professionals who value their reputation are sure to give a guarantee for the work performed. All documents must be certified by the seal and signature of the master.

How to fix it yourself?

Repair recommendations Philips steam generators:

• any repair work related to the disassembly of the device must be carried out with the device disconnected from the electrical network;
• in order for the steam generator to work properly, you need to descale it at least once a month (subject to regular use);
• when checking the operation of the device, you need to be careful: if a burning smell appears, you must disconnect it from the network and contact the service center;
• complex repairs must be carried out by a specialist.

Useful video

The Philips steam generator does not supply steam, video repair instructions:

Conclusion

In order for the steam generator to work for a long time and properly, you must strictly follow the instructions for its operation. It will not be possible to prevent all breakdowns, but it is quite possible to reduce the likelihood of their occurrence.