Step-by-step instructions on how to independently clean the Philips steam generator from scale inside

The operation of the Philips steam generator leads to the formation of scale. This process is inevitable if ordinary tap water is poured into the device. The harder it is, the faster the salts will clog the reservoir.

To avoid device failure, you need to regularly descale it. How to clean steam generator phillips (Philips) from scale inside, our recommendations will tell you.

Home cleaning methods

Descaling Philips steam generators can be conditionally divided into 3 options:

1. Self-cleaning function.
2. Subject to the use of folk remedies.
3. With the help of special preparations.

Self-cleaning function

Depending on the selected model steam generator, the methods for descaling it will differ. If the device is equipped with an ANTI-CALC cartridge, it will need to be replaced to get rid of limescale.

The iron will notify you of the accumulation of limescale in several ways:

• the indicator will light up;
• a beep will appear;
• the device stops delivering steam.

Replacing the cartridge is straightforward. The procedure is carried out in several stages:

1. The device is removed from the base. It is inside it that the cartridge is located.
2. It is taken out, removed from the old part, the rubber pad, which is at the top.
3. The new cartridge is placed in the hole on the base station, remembering to put a rubber pad on it.
4. The lid is closed.

To take advantage of it, you need to perform the following sequence of actions:

1. Disconnect the device from the mains, wait until it has completely cooled down.
2. Prepare a container to collect water. Its capacity should not be less than 0.25 liters.
3. The Easy De-Calc Plus valve is turned in the opposite direction to the clockwise direction. After removing it, the water is drained. Salt deposits will be visible in it.
4. The valve is returned to its place.

To completely remove scale from the appliance, it is recommended to perform a deep cleaning. It should be done at least once a month. The procedure is carried out after draining the water from the Easy De-Calc Plus valve.

It runs as follows:

1. Pure water is poured into the tank in a volume of 0.5 liters.
2. The valve is put in place.
3. The device is connected to the network.
4. After heating it, the fabric begins to steam until the water has completely evaporated.
5. After finishing ironing, the appliance is disconnected from the mains. When it cools down, the water is drained from it.

Philips steam generator model cleaning with Smart function:

1. The reservoir is half filled with water.
2. The device is connected to the network.
3. Install the iron in a special container for draining water and letting out steam (it is included in the kit).
4. Press and hold the Calc Clean button for 2 seconds. After this time, the device should beep.
5. Leave the device in the container for 2 minutes. Steam and water with scale will come out of it.
6. When cleaning is complete, the device stops beeping.

What models are equipped?

Philips steam generator models that equipped with self-cleaning function from scale:

• Philips GC6709 / 20 FastCare Compact;
• Philips GC6804 / 20 PerfectCare Compact Essential;
• Philips GC8625 / 30 PerfectCare Aqua;
• Philips GC7055 / 20 PerfectCare Viva;
• Philips GC9670 / 50 PerfectCare Elite Plus.

Traditional methods

If the Philips steam generator is not equipped with a descaling function, then you can use folk remedies to remove it. Effective ways to get rid of salt deposits.

Lemon acid

Features of its use:

• take 25 g of powder per liter of water;
• pour the solution into the tank, turn on the device in the network and soar it until the water runs out;
• disconnect equipment from the network;
• the container is washed with clean water several times.

Vinegar

Terms of use:

1. Vinegar and water are mixed in equal proportions.
2. Pour the prepared solution into the tank, filling it in ¼ part.
3. They plug the device into the network and steam until the vinegar water runs out.
4. Rinse the tank to remove any remaining scale particles.

Soda

Coca-Cola helps to cope with scale.

Cleansing steps:

• the drink is poured into a tank, it is not diluted with water;
• include the device in the network;
• when it heats up, you need to shake it gently;
• to clean the channels, you need to press the steam button 2-3 times;
• the device is disconnected from the network and waiting until it cools down completely;
• the soda is drained, the tank is rinsed with running water.

Commercially available cleaning products

To remove salt deposits inside the Philips steam generator, you can use ready-made products. They are sold in hardware and online stores:

1. Anti-scale. It is an inexpensive powder that includes thiourea and sulfamic acid. The cost of 1 package is 15-20 rubles.

   The product copes well with scale. Although for high-quality cleaning, the procedure must be repeated 2-3 times.

2. Top House... Liquid for cleaning irons based on organic acids. It is produced in Germany, the cost of a 250 ml bottle is about 270 rubles.

   The tool allows you to remove scale from the steam generator without damaging the device. The downside is its high cost.

3. Topper. The tool allows you to get rid of salt deposits due to its organic acids. The price for a package of 250 ml starts at 260 rubles. Its advantage is its safety of use. The disadvantages include the high cost.
4. Un Momento... The tool is a liquid analogue of powder antiscale. The package contains 5 disposable sachets, its cost starts from 101 rubles. It is an economical and efficient steam generator cleaner that has no disadvantages.

How to remove dirt from the soleplate of the iron?

You can use Greenfield to clean the soleplate of your Philips iron. The pencil is inexpensive, the price does not exceed 20 rubles. It gently removes all types of dirt from the sole.

Instructions for use:

1. The iron is plugged in and heated.
2. A pencil is led along its hot surface.
3. All traces of treatment are washed off with a cotton cloth.
4. If dirt remains, the procedure is repeated again.
5. The iron is turned off.

During cleaning, a chemical smell appears, so the procedure should be carried out in a well-ventilated area.

If there is no pencil in the house, and the sole needs to be urgently cleaned, then you can use such improvised means as:

• hydrogen peroxide;
• hydroperite tablet;
• Toothpaste;
• dishwashing liquid.

Any of the listed compositions is applied to the sole of the iron, after which it is heated and the cotton fabric is ironed for 2 minutes. After the surface has cooled, the remaining dirt is removed from it. Cleaning is carried out with soapy water, after which the product is wiped with a damp cloth.

Recommendations

Recommendations for use and cleaning Phillips steam generators from scale:

1. Do not fill the appliance with tap water. It must be passed through a salt-reducing filter.

   Limescale will not form when using distilled water.

2. After using the iron, the water must be drained from it.
3. Care must be taken when cleaning the device so as not to burn yourself.
4. It is only necessary to drain the water from the steam generator when the device has completely cooled down.
5. If the equipment does not float after descaling, it must be taken to a service center.

Related Videos

How to descale the appliance and iron soleplate in Philips steam generators, video instruction:

Conclusion

It is not difficult to rid the Philips steam generator of scale, especially if the device is equipped with such a function. Regular cleaning will allow the equipment to work smoothly and efficiently.