Without marks, or how to remove a sticker from the refrigerator at home

A new refrigerator is almost always covered with labels containing related information about a household appliance.

These stickers spoil the appearance of the object, but it is impossible to peel them off the surface with a slight movement of the hand.

How to remove a sticker from the refrigerator? To remove it, you must apply special methods. These can be improvised means or special chemicals.

These methods also help get rid of decorative images that were once pasted by the owner himself.

How can you remove the label and clean the glue from it with improvised means?

In every home there are liquids, powders, products suitable for dissolving the adhesive base of labels... They are popular with housewives due to their availability, low price, and the absence of aggressive substances in them. Each option differs in its labor costs, time and efficiency.

Soap solution

One of the simplest and most harmless remedies... Suitable for work:

• any soap,
• washing powder,
• washing gel for dishes.

The agent is applied to the label, left until the top layer is completely wet.

After that, the decorative coating is removed. The remaining glue is re-soaped and washed with a sponge. If the adhesive cannot be cleaned with soap, use other household solvents.

Soda

Sodium bicarbonate is used for the final removal of adhesive traces... For this, the powder is diluted with a small amount of water to form a pasty mass.

Then, using a sponge, apply the gruel to the glue spot. Wipe away adhering particles from the surface in a circular motion. Then wipe the area with a clean napkin.

Alcohol

Any alcohol-containing liquid can dissolve the glue. Their application is based on this. Cleaning begins with removing the top paper or film layer.

Eraser

The stationery eraser is used not only for erasing pencil drawings and inscriptions. It helps remove stubborn enamel stickers on household appliances.

The cleansing process consists of several manipulations:

1. The label is moistened with soapy water.
2. Allow surfaces to dry completely.
3. Use the soft side of the eraser to scrape off the sticker.
4. The glue particles are wiped with nail polish remover.
5. Repeat the eraser treatment.

How to wipe with nail polish remover?

It is often used to dissolve glue marks after the base paper or laminate coating of the label has been removed.

For work, you should choose a liquid that does not contain acetone... This substance can impair the appearance of the refrigerator enamel.

Apply nail polish remover to a cotton pad and moisten the sticker liberally. After that, wipe the surface with a sponge, napkin or eraser. If necessary, the processing is duplicated.

Kerosene

This remedy is considered highly effective... However, when working with it, you need to be prepared for a specific smell. Work begins with removing the top decorative layer of the label. Then the remaining traces of glue are moistened with kerosene.

Glass cleaner

The type of liquid for cleaning windows and mirrors does not matter.

The agent is sprayed onto the label and kept for 5-7 minutesso that it can be absorbed into the paper. After that, the sticker, if it is paper, is erased with a foam sponge.

During the cleaning process, you can additionally wet the surface to be treated. After removing the picture, wipe the place with a cloth dipped in water.

How to wash with a melamine sponge?

The product has established itself as a convenient cleaner for household surfaces from:

• mud,
• fat,
• ink,
• glue.

The action of the melamine sponge is based on the principle of a stationery eraser. First, the surface of the label is wetted with water. The sponge itself is also moistened and squeezed slightly.

After that, the sticker is rubbed with a sponge using physical force. As you peel, the volume of the melamine eraser decreases. With all the effectiveness of the method, after cleansing, you have to collect crumbs and waste from the sponge.

Vegetable oil

Due to its soft greasy base, the product does not damage the integrity of the enamel coating.

Vegetable oil can be replaced with analogues: petroleum jelly or essential oils... Regardless of the choice of oily solvent, the cleaning algorithm remains the same.

The outer decorative layer of the sticker is first removed in a suitable manner. Then rub the glue spot with oil. Using a sponge or cloth, roll the glue from the edges to the center. After processing, wipe the surface with soapy water and then clean water.

Steam generator

The reservoir of the heating device is filled with water, after which a stream of steam is directed to the glued sticker... The processing time is 5-10 seconds.

Carefully remove the wet label with a blunt spatula. If traces of glue remain on the surface of the refrigerator, they are removed with any available means.

However, with this method of cleaning, you must be careful, as hot steam can cause burns.

How to quickly remove with special compounds?

If the available liquids and powders for some reason do not inspire confidence, you should pay attention to the finished preparations from the category of household or technical chemicals. To remove stickers from the refrigerator, you can use products that have instructions for “remover of stickers, adhesive tape, glue”.

Another selection criterion may be ease of use and time spent on processing. The most effective remedies include:

Hg sticker remover

Solution for universal use. Copes with:

• self-adhesive labels,
• scotch marks
• oil,
• with tar.

The reagent contains nonionic surfactants (no more than 5%). After applying the liquid, the sticker is allowed to get wet, after which it is removed. The tool is convenient in that it does not require rinsing. The 300 ml bottle has a price tag of 410 rubles.

Consumers give varying ratings to HG Sticker Remover. It is noted:

• strong unpleasant odor
• economical consumption (the bottle is enough for a large area),
• unsuitable for plastic surfaces.

However, most users agree that the tool really helps to remove the sticker.

KUDO

The product is intended for cleaning:

• metal,
• ceramics,
• plastic,
• glass from self-adhesive labels, adhesive films and tapes, adhesive tape residues.

The cost of a bottle averages 330 rubles. All users who have tested KUDO 11596419 recommend it for use in practice.

The main thing that is noted in the reviews:

• high efficiency,
• fast action of the composition,
• acceptable price,
• economical consumption.

KANGAROO Scotch Remover

Aerosol from a South Korean manufacturer. The tool eliminates:

• stickers,
• scotch tape
• resin,
• tar and other petroleum products.

A 450 ml bottle costs an average of 440 rubles. There is an opinion of consumers that the declared efficiency in practice does not justify itself 100%. The sticker can be removed, but this requires a lot of effort. Besides, the aerosol smells too strong.

Removal features depending on the type of sticker

Stickers applied to household appliances differ in the material of manufacture. The method of purification largely depends on this. The only common methods are methods of removing traces of glue that remain after removing the picture itself:

1. Paper labels... They are capable of absorbing water, so they are cleaned after soaking with any liquid (water, soapy water, alcohol). You can scrape off the paper with a sponge, wooden or plastic spatula.
2. Polymer and laminated labels... The top layer is removed by hand. The corner of the sticker is pry off and, pulling on it, peels off the entire sticker. This process can be facilitated by heating with a hair dryer. The heat melts the adhesive and the label comes off effortlessly.
3. Old stickers... Their removal depends on the quality of the base: paper and polymer require their own methods. Cleaning is complicated by the fact that over time the glue hardens and the soaking time has to be increased.

Tips on the topic of the article

Any suitable method can be used to remove adhered labels. At the same time, it does not hurt to remember about ways to improve work efficiency and safety measures.

The list of key recommendations includes:

1. Remove unwanted stickers immediately. The enamel surface around the label changes color over time and after removing the old picture, the difference can be noticeable.
2. Do not scrape off the glue with a sharp object, as it can damage the enamel that covers the household appliance.
3. If a chemical is used for the first time to clean the enamel surface, you should first try it on an inconspicuous area of ​​the refrigerator.
4. After applying any cleaning agent, the surface of the refrigerator is washed with soap, then with a clean damp cloth and finally wiped dry.

Find helpful tips and tricks for cleaning your refrigerator in this section.

Useful video

The video will tell you how to remove traces of stickers from the refrigerator:

Conclusion

You can use any suitable household and store products and tools to remove new and old stickers from the refrigerator surface.

When choosing, it is important to focus on the quality of the label, since the removal of paper and polymer products has its own nuances. It is also worth considering general recommendations regarding the cleansing process.