Do I need and how to properly wash the Ascona mattress topper?

foto12090-1Ascona mattress covers are high quality covers that protect the sleeping area from wear, loss of shape and dirt.

Like any other bedding, these products tend to get dirty. There are several ways to deal with dirt, from machine washing to dry cleaning.

How to wash the Ascona mattress topper? You can find out which method is suitable for a specific model of the mattress topper from the article.

Can it be machine washed?

foto12090-2there is mattress covers Ascona machine washable. These include:

  1. Thin textile covers.
  2. Waterproof products.
  3. Mattress toppers filled with polyester fibers, latex and holofiber.

It is forbidden to subject to manual and automatic washing:

  • rigid orthopedic structures,
  • products with carbon impregnation,
  • with coconut coir.

They do not tolerate contact with water. They are cleaned dry, for example with a vacuum cleaner.

In order not to harm the product, you need to carefully study the label... On it, in the form of icons, the rules for caring for a specific mattress cover are encrypted. Read more about washing mattress toppers here.

Features of caring for mattress covers from this manufacturer

Depending on the material from which the mattress topper is made, the rules for caring for it differ.

If machine wash is allowed, it must be gentle, allowing you to maintain the functionality of an expensive product.

With polyester fibers

The mattress topper filled with polyester fibers is machine washable. This product is not picky about care, therefore, it does not require compliance with any strict rules.

foto12090-3Key recommendations:

  • wash in water up to 60 degrees;
  • spinning at a speed of up to 600 rpm;
  • refusal from aggressive detergents;
  • drying on a flat surface.

If the cover is orthopedic, in addition to polyester fibers, it contains other fillers and has a rigid frame, it cannot be washed by hand or in a machine. Only dry cleaning is suitable for such products.

With coconut filling

Mattress topper with coconut coir characterized by increased rigidity, allows you to make the sleeping place not only comfortable, but also correct from an anatomical point of view.

It cannot be washed in a typewriter or by hand, as this will lead to the loss of the functionality of the product.

However, the manufacturer has foreseen possible difficulties with cleaning and provided the mattress topper with a removable knitted cover. It closes with a zipper. It can be machine washed or hand washed.

Basic Rules:

  1. Do not exceed the water temperature of 60 degrees.
  2. Do not wring out the product at high speeds so as not to provoke its shrinkage.
  3. Do not dry in a radiator or sun.

It is not difficult to take care of the "filling" of the mattress topper. It is enough to air the product 1-2 times a month and vacuum it every time you change bed linen.

Latex and holofiber

foto12090-4A product made of natural latex filler and a knitted cover allows you to give the mattress elasticity, make the sleeping place soft and comfortable, and eliminate irregularities.

The manufacturer recommends regularly ventilating it in a dry and cool room.... If this is not possible, then he is taken out onto the balcony or outside.

This procedure should be performed at least once a month. You can use a washing machine to remove stubborn dirt.

Procedure:

  • load the product into the drum;
  • set the "delicate wash" program;
  • set the water temperature to 40 degrees;
  • spin is turned off;
  • after the end of the cycle, allow the water to drain, lay the cover on a flat surface and wait until it is completely dry.

The holofiber mattress topper is looked after in the same way. If necessary, the washing temperature is increased to 60 degrees. You can use the automatic spin function at a speed of 400 rpm.

As a detergent, both ordinary washing powder and gel are used. The main thing is that they contain no aggressive components (bleaches, chlorine, acids).

The mattress topper is protected from direct sunlight. They can damage the product.

Waterproof

foto12090-5The waterproof mattress cover is recommended to be washed by hand in cool water or in a machine in a delicate mode.

Rules to be followed:

  1. Do not exceed a temperature of 30 degrees.
  2. Do not turn on the spin function and do not twist the product manually.
  3. Use liquid detergents for washing that do not contain chlorine and other bleaching ingredients.

With slight contamination, local treatment of the product with a sponge and soap solution is sufficient. Waterproof covers do not dry near heat sources or in the sun. It is forbidden to iron them.

Drying rules

Drying a mattress topper is no less important than washing it. To prevent the product from deforming, the following rules must be observed:

  • do not squeeze or twist the fabric;
  • dry covers on a horizontal surface;
  • so that the water is faster than glass and does not drip onto the floor, you can spread a terry towel under the mattress topper;
  • do not hang the product in the sun or on heating devices.

The thicker the mattress topper, the longer it will take to dry. Natural conditions are optimal for drying.

It is impossible to lay it wet on the bed in order to prevent water from rotting and the appearance of an unpleasant smell.

How to get rid of stains?

Sometimes a single contamination appears on a clean mattress topper. Spots can have a different nature of origin (wine, cosmetics, blood, fat, food).

To get rid of them, it is not necessary to wash the entire bedding. It is enough to treat the contaminated area with one of the following compounds:

  1. Vinegar 9% and soda... Sprinkle the stain with soda, and soak a sponge with vinegar, with which they gently blot the dirt. When the reaction is over, remove the remaining cleaning agent with a damp cloth.
  2. foto12090-6Soap solution... The soap is grated and completely dissolved in water. A sponge is impregnated with it, with the help of which the stain is wiped.

    If it is old, then the solution is left for 10-30 minutes, after which it is carefully cleaned with a soft brush. The foam is then removed with a clean, damp cloth.

  3. Hydrogen peroxide... It is applied to a cotton pad and rubbed with the stain until it disappears completely. Then the cover is treated with a soft damp cloth.

When cleaning the mattress topper, it is not recommended to use a hard brush. Excessive friction can damage the fabric.

Important recommendations

Tips you might find useful to owners of the Ascona mattress topper:

  1. Do not use aggressive detergents for washing.
  2. A vacuum cleaner is used to remove dust and small particles of debris.
  3. Air the mattress topper 1-2 times a month.
  4. When loading the cover into the drum of the washing machine, it should be borne in mind that its weight after getting wet increases by 2-3 times.
In order not to frequently wash the mattress topper, it is not recommended to eat food in bed.

Conclusion

The Ascona mattress topper will last a long time if properly cared for. Machine wash soft covers should be gentle, no spinning and low temperature.

Rigid orthopedic products can only be dry cleaned.

Rate the article

1 Star2 Stars3 Stars4 Stars5 stars
Loading...
Discussions

Wash

Cleaning

Scratches