Valuable tips for your first wash in a new washing machine

foto16727-1The long-awaited purchase of a new washing machine is complete, the unit has been delivered, unpacked, installed and connected.

It would seem that everything is ready for washing, but experts advise not to rush, but to study and repeat practically the basic steps of the first start of a new washing machine.

Why is it important to start the washing machine correctly?

It is very important to carry out the first start-up of a new washing machine according to all the rules. Ignoring simple recommendations can significantly reduce the duration of operation of a household appliance, and affect the quality of washing.

The first start of washing with linen is fraught with the fact that the washed clothes will smell unpleasantly of machine oil.

It is important to ensure that the machine is placed on a level, solid surface.... Otherwise, during spinning, the machine will begin to shave very strongly, which has an extremely negative effect on the operation of the household appliance.

Overloading or improperly selected mode negates the quality of the washed clothes.

Preparing the car

Before starting the first wash in a new washing machine, you need to do the following:

  1. foto16727-2Study the manufacturer's instructions in detail, paying special attention to the section with information about the first launch.
  2. Remove the shipping bolts (fix the washing machine drum during transportation). Bolt holes must be closed with special plugs (included in the package).
  3. Check the quality of the connection. The rubber hose is connected to the water supply, and the corrugated hose to the sewer pipe or siphon.
  4. Check the tap that regulates the water supply to the washing machine (it must be open).
  5. Inspect the washing machine for residual fastening tape and other packing material, check the drum for foreign objects.

With or without linen?

Starting a new washing machine for the first time carried out without linen... It is important to adhere to this rule, since after testing a household appliance in the factory, the following remains on the drum walls:

  • particles of technical oil,
  • dust,
  • mud.
The first wash "dry" will help clean the drum from dirt and foreign odors.

Step-by-step instructions for the first launch washing machine without laundry:

  1. foto16727-3We connect the washing machine to the power supply.It is important that a separate grounded socket is allocated for the household appliance. It is strictly forbidden to use adapters.
  2. We close the loading door.
  3. Pour powder into a special compartment. The type of detergent does not really matter. It is important that the amount of powder does not exceed half the amount used for a regular wash.
  4. We set the most duration of the cycle and press the "start" button.

How and where to find out which mode to wash?

Before washing clothes in a new washing machine, the unit must be run in “test” mode. For these purposes, select the "Drum cleaning" option on the control panel.

If this option is absent on the panel, then the Cotton program starts, with a temperature regime of + 60 ° C, an additional rinse function, spinning at 400-600 rpm.

Powder detergent is poured into the main wash compartment. The laundry is not loaded into the drum during the test wash, since the purpose of this action is to check the functioning of the new household appliance, the tightness of the connection of all hoses.

At the end of the program, wipe the inside of the sealing lip with a clean cloth, thereby removing the remnants of the smallest dirt particles.

The activation of the operating mode of the washing machine may differ from model to model. More information can be obtained from the manufacturer's instructions.

What means, how much and where to pour?

foto16727-4For the first start-up of the washing machine, experienced craftsmen recommend using a special agent (Helfer Start HLR0054), which contains active surface substances that destroy the odors of industrial oil, fuel oil.

You can also purchase special ORO tablets for the first wash. The kit includes two tablets: the first (CLEAN) dissolves dirt on the inner surfaces of the washing machine, the second (CALK) is used for repeated cleaning after thirty wash cycles.

This will help prevent limescale build-up on the heating element.

What to look for before laying and processing things?

After washing without laundry started, you need to follow how the washing machine works.

Particular attention is paid to the following points:

  • whether there are any water leaks and extraneous sounds during the operation of the household appliance;
  • spinning and draining of water is carried out without any hitch;
  • the drum of the machine rotates in accordance with the set cycle: slows down during washing, accelerates during spinning.
If the first start without laundry was successful, you can safely proceed to the washing phase with laundry.

Advice

A few helpful tips will help start up a new washing machine faster:

  1. foto16727-5Water hardness affects the life of your washing machine. Before starting the washing machine for the first time, it will not be superfluous to measure the hardness indicator (indicators are sold in pet stores) in order to use special water softeners if necessary.
  2. If it is not possible to bring the drain hose into the drain, it is well fixed on the edge of the sink.
  3. Never overload the washing machine with laundry, as this may damage the unit.
  4. Do not rush to throw away the packaging. It may be needed if, for some reason, after the first start of the washing machine, repairs are required.

Conclusion

Strict adherence to the rules of the first wash of a new washing machine will allow you to enjoy the freshness of the washed laundry for as long as possible.

Rate the article

1 Star2 Stars3 Stars4 Stars5 stars
Loading...
Discussions

Wash

Cleaning

Scratches