Valuable advice on how to use Vanish for stain removal

A perennial problem is how to remove stains on clothes, carpet, upholstered furniture, home textiles, and quickly restore shining cleanliness to white things?

Strong, aggressive chemicals destroy the tissue structure. Vanish will help to achieve an amazing effect of purity.

Subject to certain rules, Vanish will help you quickly get rid of stains of any origin, return white things to their original appearance.

In this article we will tell you how to properly use Vanish from stains.

How to use Vanish: instructions for use

There are some features of using Vanish, depending on the form of release of the cleaning agent:

1. Powder. For pre-treatment of the stain, a quarter spoon of the powder is mixed with warm water to a thick slurry and applied to the dirt.

   After three minutes, rub the stain thoroughly and send the item to the washing machine for further washing.

2. Gel. The product is applied to the stain (no more than 20 ml). After five minutes, the stain is rubbed, the item is sent to the drum of the washing machine.

   To remove complex, stubborn stains, it is recommended to pre-soak the product in water with the addition of Vanish gel (150 ml of product for 10 liters of water). Soaking time - no more than forty-five minutes.

3. Spray effective in removing fresh, light dirt. The stain is treated with a spray, after which, after waiting ten minutes, the product is sent to wash in the usual mode of the washing machine.

Bleach

Using bleach is simple:

1. The sorted contaminated clothing is soaked in water with bleach (for 4 liters of water, add 100 ml of liquid product or one scoop of dry powder). Soaking time from two to six hours.
2. After that, the things are rinsed and loaded into the drum of the washing machine. If Vanish liquid bleach is used, it is poured into a special dispenser and placed along with the things in the machine. Dry powder is poured into the main wash compartment.

Stain remover

The Vanish line of test removers is represented by two types of products: powder and spray.

They use it in the following way:

1. The contaminated place is moistened with water.
2. Pour 15 grams onto the stain. Vanish powder (approximately 1 tablespoon).
3. The place of pollution is actively rubbed.
4. The product is rinsed in clean water and placed in the washing machine for the main wash.

Before using Vanish stain remover, carefully read the manufacturer's label with recommendations for care. A special measuring spoon will help to facilitate the application process and control the consumption of Vanish.

For the removal of particularly stubborn, old stains experts recommend additionally soaking the contaminated item.

For carpets

The line of carpet cleaning products includes:

• shampoo for manual cleaning;
• antibacterial shampoo (helps to disinfect fleecy surfaces);
• dry cleaning powder;
• spray;
• shampoo for washing vacuum cleaners;
• foam in a spray bottle.

Before starting cleaning, you need to vacuum on the fluffy surface (remove large debris), and then wipe the carpet with a damp cloth.

After the initial processing is completed, you can proceed to a deeper cleaning. with the help of Vanish:

1. Adhering to the manufacturer's recommendations, we dilute liquid or powder Vanish in warm water (solution concentration 1: 9).
2. Beat the resulting product into a strong foam (use a foam sponge).
3. Spread the foam over the entire surface of the carpet using the same sponge (the layer must be even).
4. Leave the carpet alone for thirty minutes.
5. After the foam has settled, we thoroughly clean the fleecy surface with a vacuum cleaner.
6. We wipe the carpet again with a damp, clean cloth.

We additionally treat old, stubborn stains with foam or Vanish spray. How to do it:

1. Spray Vanish on the stain.
2. We wait until the stain remover dries up, remove the Vanish particles with a soft damp cloth or sponge.
3. Additionally, we process the cleaned pile with a soft, slightly damp cloth.

Active rubbing of the detergent breaks the pile, which even the best dry cleaning cannot restore.

It is also necessary to pay special attention to the holding time of the agent on the surface of the carpet.... You should not exceed the limit specified by the manufacturer. Otherwise, the carpet may discolor.

Active foam

In order to refresh the carpet, quickly return it to the brightness of colors and cleanliness, use active foam. A convenient spray bottle will help to carry out the work quickly and efficiently.

How to do it:

1. The carpet is pre-cleaned with a vacuum cleaner and a damp sponge.
2. Spray Vanish spray on the cleaned surface (distance to the carpet 70-90 cm).
3. After the foam has dried, the Vanish particles are removed with a vacuum cleaner.

For washing vacuum cleaners

The use of Vanish and a washing vacuum cleaner greatly facilitates the process of carpeting.

In order to clean the carpet, you must:

1. Mix liquid Vanish with warm water (1.5 caps of cleaning agent are enough for a liter of water).
2. Pour the resulting solution into the desired compartment of the washing vacuum cleaner.
3. Vacuum the carpet in the "wet cleaning" mode
4. Wait for the carpet to dry.
5. Vacuum the carpet again using the dry cleaning mode.

For washing

Where to pour liquid Vanish in the washing machine? Modern washing machines have three compartments for detergents.

The smallest tray (most often marked with an asterisk or flower) is for the air conditioner.Powder is poured into the medium compartment when using the prewash program. The largest tray is for the main wash program.

It is important to distinguish between the purpose of the compartments and fill them correctly (the quality of washing depends on this).

For washing machines with a bleaching program, the washing process includes the following steps:

1. Sorting laundry. Underwear, clothing, interior textiles, bed linen are washed separately. Colored fabrics are also separated from whites.
2. Loading the drum with sorted laundry.
3. Filling the main wash compartment with washing powder (the dosage is indicated by the manufacturer on the packaging).
4. Wash the laundry in the appropriate mode for the type of fabric (e.g. cotton, delicate fabrics).
5. Loading a special compartment with a bleaching agent (dosage indicated by the manufacturer).
6. Washing laundry in the "bleaching" mode.

If there is no additional “bleaching” program in the washing machine, the washing process proceeds according to a different scheme:

1. The sorted laundry is loaded into the drum of the washing machine.
2. Detergent powder is poured into the pre-wash compartment, and Vanish oxygen bleach into the main wash compartment.
3. The mode is set corresponding to the type of laundry (with prewash).

Precautions

Regardless of which form Vanish is used in (spray, powder or liquid) it is important to adhere to the following precautions:

• Never test the cleansing effect of Vanish on handicrafts with fragile colors, silk items.
• Experts recommend avoiding getting Vanish on metal fittings, leather inserts.
• Before use, Vanish must be checked on a small, inconspicuous area of ​​the product.
• In the process of working with Vanish, the room must be ventilated. Also, do not forget about personal protective equipment (gloves on hands, respirator on the face).

  Contact with unprotected skin areas is fraught with the development of allergic reactions: itching, redness. At the end of work with Vanish, hands must be washed under running water and soap.

• If stain remover or bleach Vanish gets on mucous membranes, you should immediately rinse your eyes or mouth with clean water.

Advice

There are several secrets on how to use Vanish properly to get the most out of your purity:

• Vanish is most effective when interacting with a damp cloth. Moisten your clothing, carpet or upholstery before application.
• Vanish loses its cleaning properties when interacting with chlorine-containing components.
• Do not leave soaked laundry near heat sources (bacteria) or in direct sunlight.

Storage of funds

Regardless of the form of release, Vanish is stored only in an upright position in a cool dry place. The shelf life of the stain remover is one and a half years.

It is important that the packaging is tightly closed... This will help keep the cleaner out of dust and dirt.

Vanish is kept out of the reach of children. The ideal variant is a wardrobe with a lock.

Conclusion

Unlike other, not always effective cleaning products, Vanish is an ideal assistant in removing stains, washing white things, keeping the whole house clean.

It is enough to strictly adhere to the stain removal and whitening technologyso that the work goes quickly, and the result is pleasing with quality.